Navigator 2WD V8-5.4L DOHC VIN R (2001)
10. Apply a head of Urethane Sealant Essex 400 HV or Essex U-216 meeting Ford specification WSB-M2G316-B to the pinch weld just outside the
foam butyl dam.
CAUTION: If a vehicle is to be driven within 24 hours of urethane sealant application, Urethane sealant Essex U-216 meeting Ford specification
WSB-M2G316-B must be used due to its one hour cure time.
11. Install the interior rear view mirror.
12. Using the alignment marks, install the windshield glass.
CAUTION: Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.
13. Install the upper windshield weatherstrip.
14. Paddle the excess Urethane Sealant from the two sides of the windshield glass.
NOTE: Use one continuous stroke when removing the excess Urethane Sealant.
15. If necessary, remove excess Urethane Sealant from the outside surface of the windshield glass.