Navigator 2WD V8-5.4L SOHC VIN L (1999)
CD Changer: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the mat at bottom the of the console bin and remove the screws.
^
To ease removal of the trim panel, pull the front edge back and lift out.
3. Remove the screws and pull out the CD changer and bracket.
4. Disconnect the electrical connectors.
5. Remove the screws.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
