lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

ABS - Lamp ON/False ABS Cycling/High Brake Pedal Effort|Page 5411 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5402
Page 1
background image

Wheel Speed Sensor: Customer Interest
ABS - Lamp ON/False ABS Cycling/High Brake Pedal Effort

Article No.
99-13-13

06/28/99

^

ANTI-LOCK BRAKE SYSTEM (ABS) - ABS LAMP 
ILLUMINATED - 4X2 ONLY

^

ANTI-LOCK BRAKE SYSTEM (ABS) - FALSE ABS 
CYCLING AT LOW SPEEDS - 4X2 ONLY

^

ANTI-LOCK BRAKE SYSTEM (ABS) - INCREASED 
BRAKE PEDAL EFFORT AT LOW SPEEDS - 4X2 ONLY

^

LAMP - ANTI-LOCK BRAKE LAMP ILLUMINATION - 
INCREASED BRAKE PEDAL EFFORT AND/OR
FALSE ABS CYCLING AT LOW SPEEDS - 4X2
ONLY

FORD:
1997-1999 EXPEDITION, F-150, F-250 LD

LINCOLN:
1998-1999 NAVIGATOR

This TSB article is being republished in its entirety to state coverage for 4X2 vehicles only and revise Figure 1.

ISSUE
Increased brake pedal effort and/or false Anti-lock Braking System (ABS) cycling at low speeds, or ABS lamp illumination may occur on some vehicles.
This may be caused by an incorrectly installed front wheel speed sensor, low vacuum in the brake booster, or a chipped or broken tooth on the tone ring
resulting in reduced output to the ABS Electronic Control Unit (ECU).

ACTION
Be sure the front wheel speed sensor is properly installed and the wires are properly routed. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

1

Retrieve and record any ABS diagnostic trouble codes and follow procedures detailed in the appropriate Service or Workshop Manual.

ABS - Lamp ON/False ABS Cycling/High Brake Pedal Effort|Page 5411 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5402