Navigator 2WD V8-5.4L SOHC VIN L (1999)
Assembly
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
1. Lubricate the new piston assembly seals. Use clean High-Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting
Ford specification ESA-M6C25-A. Do not use oil, as it will destroy the seals.
2. Carefully install the secondary piston assembly.
3. Carefully install the primary piston assembly.
4. Install the snap ring.
1. Depress the primary piston.
2. Install the snap ring.
