Navigator 2WD V8-5.4L SOHC VIN L (1999)
Cruise Control Servo Cable: Service and Repair
REMOVAL
NOTE: 5.4L 2 Valve Triton V8 shown; others are similar.
1. Remove the accelerator control splash shield.
1
Remove the screws.
2
Remove the accelerator control splash shield.
2. Remove the speed control actuator cable from the throttle nail head.
1
Lift the speed control actuator cable upward.
2
Squeeze the speed control actuator cable tabs and remove from the throttle nail head.
3. Remove the speed control actuator cable cap from the speed control servo.
1
Push in the locking arm on the speed control actuator cable cap.
2
Rotate the speed control actuator cable cap counterclockwise and remove the speed control actuator cable cap from the speed control servo.
