Navigator 2WD V8-5.4L SOHC VIN L (1999)
13. On 5.4L engines, disconnect the RH ignition coil electrical connections.
14. Disconnect the climate vacuum connection.
15. Raise and support the vehicle.
16. Disconnect the A/C compressor electrical connection.
17. Disconnect the Crankshaft Position (CKP) sensor electrical connection.
18. Position the wiring harness aside.
19. Lower the vehicle.
20. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These
tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
NOTE: The bolts are part of the valve cover and cannot be removed.