Navigator 2WD V8-5.4L SOHC VIN L (1999)
4. Install the bolt.
5. NOTE: If the oil pan is not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface Cleaner
F4AZ-19A536-RA or equivalent meeting Ford specification WSE-M5B392-A. Allow to dry until there is no sign of wetness, or four minutes,
whichever is longer. Failure to follow this procedure may result in future oil leakage.
Apply the silicone at the engine front cover to cylinder block mating surface.
^
Use Ford Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
6. NOTE: If the oil pan is not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface Cleaner
F4AZ-19A536-RA or equivalent meeting Ford specification WSE-M5B392-A. Allow to dry until there is no sign of wetness, or four minutes,
whichever is longer. Failure to follow this procedure may result in future oil leakage.
Apply the silicone at the rear oil seal retainer to cylinder block sealing surface.
^
Use Ford Silicone Gasket and Sealant F6AZ-1956-AA or equivalent meeting Ford specification WSE-M4G323-A6.
7. Position the oil pan gasket.
