Navigator 2WD V8-5.4L SOHC VIN L (1999)
4. Connect the heater inlet line to the heater inlet line.
1
Connect the fittings.
2
Loosely install the nut.
5. Install the heater inlet line.
1
Remove the RH rear wheel and tire.
2
Install the end with the red tape between the frame and the body.
6. Connect the heater inlet line to the heater inlet line.
1
Connect the fittings.
2
Loosely install the nut.
7. Install the heater inlet line.
^
Install the end with the green tape through the floor opening.