Navigator 2WD V8-5.4L SOHC VIN L (1999)
Multifunction Electronic Control Module: Service and Repair
Driver Seat Module
DRIVER SEAT MODULE (DSM)
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the driver seat.
3. Disconnect the driver seat module electrical connectors.
4. Remove the screws from the Driver Seat Module (DSM) and release the module retainers from the module bracket.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
