Navigator 2WD V8-5.4L SOHC VIN L (1999)
Seat Belt Buckle: Service and Repair
40/60 Split Bench, Driver Seat
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the driver seat safety belt buckle.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Use Safety Belt Bolt Bit to remove the bolt.
3
Remove the buckle.
NOTE: To ease removal, position the driver seat in its most rearward position and the passenger seat in its most forward position.
INSTALLATION
1. To install, reverse the removal procedure.
-
Check the restraint system for proper operation.