Navigator 2WD V8-5.4L SOHC VIN L (1999)
Alignment: Service and Repair
Caster and Camber
1. Remove the alignment plate.
1
Remove the upper suspension and nuts.
2
Remove the alignment plate.
2. Install the washers and the adjusting nuts.
3. NOTE: A pry bar can be used between the front suspension upper arm and the frame pocket to aid in moving the arm.
To increase caster and camber, use the following steps.
1
To increase caster move the front of the front suspension upper arm outboard and move the rear of the front suspension upper arm inboard.
2
To increase camber, move the front suspension upper arm outboard equally.