Navigator 2WD V8-5.4L SOHC VIN L (1999)
Rotate the piston while holding the steering gear ball return guide and install the 28 ball bearings into the opening in the ball guide.
19. Install the steering gear ball return guide clamp.
1
Position the steering gear ball return guide clamp.
2
Install the bolts.
20. Stall a new gasket.
21. Lubricate and install the seal on the piston.
-
Use Multi-Purpose Grease DOAZ-1958-AA or equivalent meeting Ford specifications ESB-M1C93-B and ESRM1C159-A.
22. NOTE: Make sure to align the oil passages in the steering gear housing.
Install the piston assembly into the steering gear housing.
