Navigator 2WD V8-5.4L SOHC VIN L (1999)
Relieve the tension on the parking brake system.
1
Pull the front parking brake cable and conduit.
2
Insert a suitable retainer into the parking brake control.
6. Disconnect the rear parking brake cable and conduit from the rear axle.
1
Remove the rear parking brake cable and conduit from the rear axle bracket assembly.
2
Remorse the cable from the caliper.
-
Repeat for the other side.
7. Position the disc brake caliper aside.
1
Remove the bolts.
2
Secure the caliper aside with wire.
-
Repeat for the other side.
8. Disconnect the axle vent tube.