Navigator 2WD V8-5.4L SOHC VIN L (1999)
Wheel Bearing: Service and Repair
Front
Removal
1. Raise and support the vehicle.
2. CAUTION: Do not use heat to loosen a seized lug nut. Heat can damage the wheel and the wheel bearings.
Remove the tire and wheel assembly.
3. Remove the front disc brake caliper and anchor plate.
4. Remove the hub grease cap, cotter pin and retainer nut.
1
Remove the hub grease cap.
2
Remove and discard the cotter pin.
3
Remove the retainer nut.
5. Remove the spindle nut.
6. Remove the front wheel outer bearing retainer washer and the outer front wheel bearing.
