Navigator 2WD V8-5.4L SOHC VIN L (1999)
16. Install the following components:
1
Install the retainer nut.
2
Install a new cotter pin.
3
Install the hub grease cap.
17. Install the front disc brake caliper anchor plate.
18. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Install the tire and wheel assembly.
1
Position the tire and wheel assembly.
2
Install the lug nuts and lower the vehicle.
3
Tighten the lug nuts in sequence.
4
Install the wheel cover.
