Navigator 2WD V8-5.4L SOHC VIN L (1999)
7. Remove the 10 ring gear bolts.
8. NOTE: The anti-lock speed sensor ring cannot be reused once removed.
Insert a punch in the bolt holes and drive off the ring gear and, if necessary, the anti-lock speed sensor ring.
9. Install the differential case.
^
Position the differential case assembly, including the bearing clips and shims, in the rear axle housing. Install the differential bearing caps and
the differential bearing cap bolts.
10. Position the special tool.
1
Rotate the differential case to ensure the differential bearings are correctly seated.
2
Position the special tool.
