Navigator 2WD V8-5.4L SOHC VIN L (1999)
1. Position the special tools and the inner and outer bearing cups into their respective bores.
1
After placing the inner and outer bearing cups in their bores, place the special tool on the inner pinion gearing cup.
2
Place the special tool on the outer pinion bearing cup.
3
Install the special tool.
2. Tighten the special tool to seat the pinion bearing cups into their bores.
3. NOTE: Steps 3 and 4 are on alternate method of performing Steps 1 and 2.
Drive the outer pinion bearing cup into the axle housing using the special tools.
4. Drive the inner pinion bearing cup into the axle housing using the special tools.
