Navigator 2WD V8-5.4L SOHC VIN L (1999)
4. Drive the inner pinion bearing cup into the rear axle housing, using the special tools.
5. CAUTION: Whenever the cups are replaced, the differential pinion bearings must also be replaced.
Make sure the cups are correctly seated in their bores.
^
If a feeler gauge of the specification shown fin the illustration can be inserted between a cup and the bottom of its bore at any point around the
cup, the cup is not correctly seated.
6. NOTE: Apply only a light oil film on the pinion bearings before assembling the tool.
Assemble and position the Pinion Depth Gauge set.
