Navigator 2WD V8-5.4L SOHC VIN L (1999)
5. Remove the Turbine Shaft Sensor (TSS).
1
Remove the bolt.
2
Remove the Turbine Shaft Sensor (TSS).
6. Remove the Output Shaft Speed (OSS) Sensor.
1
Remove the bolt.
2
Remove the Output Shaft Speed (OSS) Sensor.
Installation
1. Install the Output Shaft Speed (OSS) Sensor.
1
Lubricate the O-ring and install the Output Shaft Speed (OSS) Sensor.
2
Install the bolt.
2. Install the Turbine Shaft Sensor (TSS).
1
Lubricate the O-ring and in stall the Turbine Shaft Sensor (TSS).