Navigator 4WD V8-5.4L (2010)
6. Install the LH C-pillar trim panel and attach the rear door weatherstrip.
7. Install the LH C-pillar trim panel nut and cover.
8. Install the LH second row safety belt retractor D-ring and bolt.
-
Tighten to 40 Nm (30 lb-ft).
9. Attach the LH second row safety belt retractor D-ring cover.
-
Verify the safety belt retractor operates without excessive effort or binding.
10. Connect the RH Safety Canopy(R) module electrical connector.
11. Install the RH C-pillar trim panel and attach the rear door weatherstrip.