Navigator 4WD V8-5.4L (2010)
Removal and Installation
1. Remove the brake pads. For additional information, refer to Brake Pads See: Brake Pad/Service and Repair/Front Disc Brake/Brake Pads.
2. Remove and discard the 2 brake caliper anchor plate bolts.
-
To install, tighten the new bolts to 250 Nm (184 lb-ft).
3. Clean any rust or foreign material from the anchor plate and wheel knuckle.
-
Use specified parts cleaner to clean mating surfaces.
4. To install, reverse the removal procedure.
