Navigator 4WD V8-5.4L (2010)
6. NOTE: Rotate the steering column so the pinch bolt for the steering column coupling allows clearance for the isolator bolt.
Remove the upper front axle carrier mounting bushing bolt.
7. Remove the axle shaft housing carrier bushing bolt.
8. Remove the lower front axle carrier mounting bushing bolt.
9. NOTICE: Use care when lowering the front axle housing, or the vacuum lines to the axle solenoid may become disconnected or damaged.
Lower the axle to allow clearance for the oil pan to be removed.
All vehicles
10. Remove the starter wiring harness rear support bracket bolt.
11. Remove the nut and position the starter wiring harness and the transmission fluid cooler tubes aside.
