Navigator 4WD V8-5.4L (2010)
14. Connect the fuel supply tube quick connect coupling. For additional information, refer to Fuel Delivery and Air Induction.
15. Position the PCV tube and connect the quick connect couplings. For additional information, refer to Fuel Delivery and Air Induction.
16. Position the TB-to-ACL outlet tube adapter and install the 3 bolts.
-
Tighten the bolt to 10 Nm (89 lb-in).
17. Position the air intake resonator assembly, install the bolt and the clamp.
-
Tighten the bolt to 10 Nm (89 lb-in).
18. Position the crankcase ventilation tube and connect the quick connect couplings. For additional information, refer to Fuel Delivery and Air
Induction.
19. Install the generator. For additional information, refer to Charging System.
20. Fill and bleed the engine cooling system. For additional information, refer to Cooling System &/or Engine Block Heater.
