Navigator 4WD V8-5.4L (2010)
Removal and Installation
1. Remove the RH quarter trim panel.
2. Disconnect the auxiliary temperature blend door actuator electrical connector.
3. Remove the 4 auxiliary temperature blend door actuator screws.
4. Remove the auxiliary temperature blend door actuator.
5. To install, reverse the removal procedure.
Auxiliary Temperature Blend Door Actuator - Expedition EL, Navigator L
Auxiliary Temperature Blend Door Actuator - Expedition EL, Navigator L
Removal and Installation
1. Fold the third row seats fully forward.
2. Remove the RH D-pillar trim panel.
3. Remove the liftgate sill plate.
4. Remove the rear floor cargo space trim panel.