Navigator 4WD V8-5.4L (2010)
14. Remove the 2 RH outer air deflector pin-type retainers and position the air deflector aside.
15. Remove the 2 pin-type retainers and detach the RH air deflector from the condenser bracket.
16. Remove the 9 lower radiator splash shield pin-type retainers and position the shield aside.
17. Release the clamps and disconnect the 2 transmission cooler lines from the transmission cooler.
18. Detach the transmission cooler line pin-type retainer from the condenser core bracket.
19. NOTE: The cooling module must be positioned rearward to raise and detach the 4 condenser mounts from the cooling module.
NOTE: The condenser must be removed from below the vehicle.
Detach and remove the condenser core and transmission cooler as an assembly in the following sequence.
