Navigator 4WD V8-5.4L (2010)
NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
All vehicles
1. Remove the headlamp assembly. For additional information, refer to Headlamp Assembly See: Service and Repair.
Expedition
2. Rotate the headlamp bulb approximately 1/8 turn counterclockwise and remove the bulb from the headlamp assembly.
Navigator
3. Remove the High Intensity Discharge (HID) bulb access cover.
4. Remove the 2 screws and the HID bulb.
-
Disconnect the electrical connector.
All vehicles
5. To install, reverse the removal procedure.