lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8560 > < Initial Inspection and Diagnostic Overview|Page 8558
Page 13
background image

-

Is the voltage greater than 10 volts?

Yes

The vehicle is operating correctly. SEND the trailer to an authorized camper/trailer repair facility.

No

VERIFY the BJB fuse 58 (15A) is OK. If OK, GO to AB2. If not OK, REFER to the Wiring Diagrams to identify the possible causes of the circuit short.
 See: Diagrams/Electrical Diagrams/Diagrams By Number

-------------------------------------------------
AB2 CHECK FOR VOLTAGE TO THE TRAILER TOW CONNECTOR

 

-

Disconnect: Trailer Tow C4099.

-

Measure the voltage between the trailer tow C4099-7, circuit CAT16 (GY/BN), harness side and ground.

-

Is the voltage greater than 10 volts?

Yes

INSTALL a new trailer tow connector. TEST the system for normal operation.

No

GO to AB3.

-------------------------------------------------
AB3 CHECK FOR VOLTAGE TO THE BJB FUSE 58 (15A)

 

-

Measure the voltage between the BJB fuse 58 (15A), circuit CLS10 (GY/BN), input side and ground.

-

Is the voltage greater than 10 volts?

Yes

REPAIR circuit CAT16 (GY/BN) for an open. TEST the system for normal operation.

Initial Inspection and Diagnostic Overview|Page 8560 > < Initial Inspection and Diagnostic Overview|Page 8558