lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8566 > < Initial Inspection and Diagnostic Overview|Page 8564
Page 19
background image

No

REPAIR circuit CAT23 (GN/YE) for an open. TEST the system for normal operation.

-------------------------------------------------
AD8 CHECK FOR VOLTAGE AT THE TRAILER TOW CONNECTOR (BATTERY CHARGE ALWAYS ON)

 

-

Ignition OFF.

-

Measure the voltage between the trailer tow connector pin 5, circuit CAT14 (OG), component side and ground.

-

Is any voltage present?

Yes

GO to AD9.

No

The vehicle is operating correctly. SEND the trailer to an authorized camper/trailer repair facility.

-------------------------------------------------
AD9 CHECK THE TRAILER BATTERY CHARGE VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE

 

-

Disconnect: Trailer Battery Charge Relay.

-

Measure the voltage between the trailer tow connector pin 5, circuit CAT14 (OG), component side and ground.

-

Is any voltage present?

Yes

REPAIR circuit CAT14 (OG) for a short to voltage. TEST the system for normal operation.

No

GO to AD10.

-------------------------------------------------
AD10 CHECK FOR VOLTAGE TO THE TRAILER BATTERY CHARGE RELAY COIL (BATTERY CHARGE ALWAYS ON)

 

-

Measure the voltage between the trailer battery charge relay pin 1, circuit CAT23 (GN/YE), BJB face side and ground.

Initial Inspection and Diagnostic Overview|Page 8566 > < Initial Inspection and Diagnostic Overview|Page 8564