Navigator 4WD V8-5.4L (2010)
12. Turn the steering wheel so the top of the wheel is back in the straight-ahead position (the 12 o'clock position).
13. Open and lower the glove compartment door to allow access to the passenger air bag electrical connector.
-
If equipped, disconnect the glove compartment door dampener.
14. Disconnect the passenger air bag module electrical connector.
15. NOTE: There are 2 similar connectors under the passenger seat. The passenger seat side air bag module electrical connector is located toward the
seat outboard position.
Remove the passenger front seat cushion panel shield and disconnect the passenger seat side air bag module electrical.
16. Release the RH second row safety belt retractor D-ring cover.
17. Remove the bolt and the RH second row safety belt retractor D-ring.
18. Remove the cover and the RH C-pillar trim panel nut.
