lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2953 > < Initial Inspection and Diagnostic Overview|Page 2951
Page 56
background image

-

Is the resistance less than 5 ohms?

Yes

GO to U3.

No

REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
U3 CHECK THE MS-CAN CIRCUITS BETWEEN THE GPSM AND THE DLC FOR AN OPEN

 

-

Measure the resistance between the GPSM C2398-2, circuit VDB06 (GY/OG), harness side and the Data Link Connector (DLC) C251-3, circuit
VDB06 (GY/OG), harness side.

Initial Inspection and Diagnostic Overview|Page 2953 > < Initial Inspection and Diagnostic Overview|Page 2951