lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2971 > < Initial Inspection and Diagnostic Overview|Page 2969
Page 74
background image

-

Is the resistance less than 5 ohms?

Yes

GO to W19.

No

CONNECT all modules. CONNECT the negative battery cable. GO to W68.

-------------------------------------------------
W19 VERIFY VEHICLE EQUIPMENT - RETM

 

-

Inspect the vehicle for a Rear Entertainment Module (RETM).

-

Is the vehicle equipped with an RETM?

Yes

GO to W20.

No

GO to W21.

-------------------------------------------------
W20 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE RETM DISCONNECTED

 

-

Disconnect: RETM C949.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to W21.

No

CONNECT all modules. CONNECT the negative battery cable. GO to W69.

-------------------------------------------------
W21 VERIFY VEHICLE EQUIPMENT - DSM

 

-

Inspect the vehicle for a Driver Seat Module (DSM).

-

Is the vehicle equipped with a DSM?

Yes

GO to W22.

No

GO to W23.

Initial Inspection and Diagnostic Overview|Page 2971 > < Initial Inspection and Diagnostic Overview|Page 2969