Navigator 4WD V8-5.4L (2010)
2. Install the Safety Canopy(R) module B-pillar bracket hook in the sheet metal.
3. Install the Safety Canopy(R) module B-pillar bracket bolt.
-
Tighten to 9 Nm (80 lb-in).
4. Install the Safety Canopy(R) module roof bracket bolt.
-
Tighten to 9 Nm (80 lb-in).
5. Install the 2 Safety Canopy(R) module rear bolts.
-
Tighten to 9 Nm (80 lb-in).
6. Install the C-pillar Safety Canopy(R) module bolt.
-
Tighten to 9 Nm (80 lb-in).
Expedition EL/Navigator L vehicles
7. Install the Safety Canopy(R) module rear tether anchor bracket and bolt to the D-pillar.
-
Tighten to 9 Nm (80 lb-in).
8. Attach the 3 Safety Canopy(R) module rear tether routing clip pin-type retainers to the sheet metal.
Expedition/Navigator vehicles
9. Install the Safety Canopy(R) module rear tether anchor bracket and bolt to the D-pillar.
-
Tighten to 9 Nm (80 lb-in).
10. Attach the Safety Canopy(R) module rear tether routing clip pin-type retainer to the sheet metal.
All vehicles
11. Install the 2 Safety Canopy(R) module front bolts.
-
Tighten to 9 Nm (80 lb-in).
