Navigator 4WD V8-5.4L (2010)
6. Install the front cam bolt kit and loosely install the nut.
7. Install the rear cam bolt kit and loosely install the nut.
8. To adjust the caster and camber, refer to the following chart.
-
Adjustments that require moving the front and the rear of the lower arm should be made equally.
9. With the weight of the vehicle resting on the wheel and tire assemblies, hold the front cam bolt and tighten the nut to 350 Nm (258 lb-ft).
10. With the weight of the vehicle resting on the wheel and tire assemblies, hold the rear cam bolt and tighten the nut to 350 Nm (258 lb-ft).
11. Install the 2 stabilizer bar bracket bolts and plate assembly.
