Navigator 4WD V8-5.4L (2010)
Seals and Gaskets: Service and Repair
Manual Control Lever Shaft and Seal
Manual Control Lever Shaft and Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. If equipped, remove the heat shield.
3. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
Move the locking tab up and disconnect the transmission selector lever cable end from the manual control lever.
4. Remove the transmission fluid fill plug transmission fluid level indicator assembly located on the passenger side front portion of the transmission
case. Removal of the transmission fluid fill plug will relieve any vacuum that might have built up in the transmission. This will aid in allowing the
transmission fluid pan to be easily removed when the bolts are removed.
5. Remove the transmission fluid pan and allow the transmission fluid to drain.