Navigator 4WD V8-5.4L (2010)
3. Remove the hood release cable lever.
4. Remove the instrument panel lower reinforcement panel.
5. NOTE: Steering wheel removed for clarity.
Unsnap and remove the upper steering column shroud from the lower shroud.
6. Remove the steering column lower shroud.
1. Remove the screws and the lower shroud.
7. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable assembly between the steering column
selector lever arm and the steering column bracket.
Disconnect the selector lever cable from the steering column.
1. Disconnect the selector lever cable from the selector lever arm.
2. Carefully lift the locking tab and disconnect the selector lever cable from the steering column bracket.
3. Disconnect the selector lever cable retainer.
