Navigator 4WD V8-5.4L (2010)
SSE
1. Install the SSE.
2. Position the solenoid bracket in place and install the 8 bolts.
-
Tighten to 6 Nm (53 lb-in).
3. NOTE: The TR switch pin must be aligned with the manual control valve during installation.
Position the TCM on the mechatronic assembly.
1. TCM
2. Mechatronic assembly
3. TR switch pin
4. Install the 6 long bolts into the TCM unit. Tighten the bolts in the sequence shown.
-
Tighten to 6 Nm (53 lb-in).
