Navigator 4WD V8-5.4L (2010)
14. Install the transmission fluid pan and tighten the transmission fluid pan bolts in a crisscross pattern.
-
Tighten to 12 Nm (106 lb-in).
15. Connect the transmission vehicle harness connector by pushing it in and twisting the outer shell to lock it in place.
16. Make sure the transmission fluid is at the correct level, follow the steps for Adding Additional Transmission Fluid or Removing Transmission
Fluid. For additional information, refer to Transmission Fluid Drain and Refill See: Service and Repair/Procedures/Transmission Fluid Drain and
Refill.
17. If a new or existing mechatronic assembly is installed, the TCM will need to be programmed with the latest calibration.