Navigator 4WD V8-5.4L DOHC VIN A (2000)
Multifunction Electronic Control Modules: Service and Repair
Module-Driver Seat
REMOVAL
1. If exposed to these charges, damage may result. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to electrical charges.
2. Remove the driver seat. For additional information, refer to Seats.
3. Disconnect the driver seat module electrical connectors.
4. Remove the screws from the Driver Seat Module (DSM) and release the module retainers from the module bracket.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.