Navigator 4WD V8-5.4L DOHC VIN A (2000)
16. If equipped, remove the two third row safety belt guides.
1
Lift the two covers.
2
Use Safety Belt Bolt Bit to remove the safety belt guide bolts.
3
Remove the two third row safety belt guides.
17. Remove the two D-pillar trim panels.
^
Remove the liftgate door opening weather seal.
NOTE: Remove the lower hook attached to the quarter trim panel, followed by the top attachment, and then the lower rear attachment.
18. If equipped, remove the full overhead console (without roof opening panel).
1
Remove the screw from the inside of the sunglass storage bin.
2
Release the three clips and slide the roof console forward and then down.
3
Disconnect the electrical connectors.