lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seat Heater Switch > < Seat Control Switch|Page 9648
Page 3
background image

9. Remove the lumbar control switch from the side shield.

^

Release the tabs and remove the lumbar control switch.

INSTALLATION

1. To install, reverse the removal procedure.
2. Reactivate the supplemental restraint system. For additional information, refer to Air Bag Systems.

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.

3. If equipped, prove out the air bag system. For additional information, refer to Air Bag Systems.
4. Check the restraint system for correct operation.

Seat Heater Switch > < Seat Control Switch|Page 9648