Navigator 4WD V8-5.4L DOHC VIN A (2000)
Brake Hose/Line: Description and Operation
CAUTION: Only Ford authorized inlet hydraulic brake tubes should be used. These tubes are of a specific design and new Ford authorized parts
only should be installed.
Steel tubing with flex hoses are used in the hydraulic lines between the brake master cylinder and the hydraulic control unit. Steel tubing is used
between the hydraulic control unit and the front and rear hoses.
Double flared brake tubing should provide good leakproof connections.
When replacing hydraulic brake tubing, hoses, or connectors, tighten all connections securely. After replacement, bleed the brake system.