Navigator 4WD V8-5.4L DOHC VIN A (2000)
Refrigerant Lines: Part 2 Of 2
REMOVAL
NOTE: The front auxiliary heater outlet line is shown; the front auxiliary heater inlet line is similar.
1. Drain the cooling system. For additional information, refer to Cooling System.
2. Turn the air suspension switch off, if equipped.
3. Raise and support the vehicle. For additional information, refer to Maintenance/Service and Repair.
4. Remove the wheel and tire assembly. For additional information, refer to Wheels,Tires and Alignment.
5. Loosen the RH front fender splash shield.
1
Remove the bolts.
2
Remove the pin-type retainers.
3
Move the front fender splash shield to access the lines.