Navigator 4WD V8-5.4L DOHC VIN A (2000)
2. Note: Bolts should be hand-started, positions 7-12 first then 1-6.
Install the lower intake manifold:
-
Position the gaskets.
-
Install the intake manifold.
-
Install the bolts.
-
Tighten the bolts to 10 Nm (89 inch lbs.) and then an additional 90 degrees in the sequence shown.
3. Connect the water temperature indicator sensor.
4. Position the vacuum harness and connect the vacuum line to the fuel injector pressure regulator.