Navigator 4WD V8-5.4L DOHC VIN A (2000)
Exhaust Manifold: Service and Repair
RH
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the two nuts from the Y pipe.
4. Partially lower the vehicle.
5. Remove the RH front wheel and tire assembly.
6. Remove the RH front fender splash shield.
7. Remove the starter cable harness bolt and position the cable aside.
8. Remove the exhaust manifold.
-
Remove the eight nuts.
-
Remove the exhaust manifold and gasket.
Installation