Navigator 4WD V8-5.4L DOHC VIN A (2000)
Air Duct: Service and Repair
Floor Duct
Duct - Floor
Removal and Installation
1. Remove the restraints control module.
2. Remove the nut and bolt and the RH instrument panel brace.
3. Remove the lower LH instrument panel brace nut and position the brace aside.
4. Cut the sides of the rear seat floor duct at the floor duct connection to allow it to be folded away from the floor duct.
5. Remove the floor duct.
1. Remove the 2 floor duct screws.
2. Remove the floor duct.
6. To install, reverse the removal procedure.
-
Install a tie strap around the end of the rear seat floor duct at the floor duct connection.