Navigator 4WD V8-5.4L DOHC VIN A (2000)
2
Remove the retainer.
5. Remove the spare tire.
6. Turn the air suspension switch off, if equipped.
7. Raise and support the vehicle. For additional information, refer to Maintenance/Service and Repair.
8. Remove the four line bracket retaining nuts.
9. Remove the four line brackets by inserting a screwdriver in the stud hole and twisting.
CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
10. Disconnect the inlet line peanut fitting.
1
Remove the nut.
2
Disconnect the line.
