Navigator 4WD V8-5.4L DOHC VIN A (2000)
5. Note: After removal, discard the filter and seal assembly.
Remove the filter and seal assembly by carefully pulling and rotating the filler as necessary.
6. CAUTION: Be careful not to scratch or damage the aluminum bore. The new seal may leak and damage to the case will result.
If the seal remains in the pump bore, remove it carefully with a small screwdriver so as not to scratch or damage the aluminum bore.
7. Remove the torque converter drain plug cover.
8. Remove the torque converter drain plug.
9. Note: If equipped with a radiator in-tank transmission fluid cooler, or an auxiliary cooler, the coolers will need to be flushed.
Thoroughly flush the cooler lines, fluid coolers, and the cooler bypass valve.
Installation
