Navigator 4WD V8-5.4L DOHC VIN A (2000)
3. Install the heater outlet line.
^
Install the end with the red tape over the frame.
^
Install the end with the yellow tape between the frame and the body vertical flange.
NOTE: View shown with fender skirt removed for clarity.
4. Connect the heater water outlet line to the heater water outlet line. Refer to illustration: Multiple-Piece Auxiliary A/C Heater Line Kit.
1
Connect the fitting.
2
Loosely install the nut.
5. Install the heater water outlet line to the heater water outlet line. Refer to illustration: Multiple-Piece Auxiliary A/C Heater Line Kit.
^
Install the line through the wheel opening.
NOTE: Fender skirt removed for clarity.
