Navigator 4WD V8-5.4L DOHC VIN A (2000)
6. Connect the heater inlet line to the heater inlet line. Refer to illustration: Multiple-Piece Auxiliary A/C Heater Line Kit.
1
Connect the fittings.
2
Loosely install the nut.
7. Install the heater inlet line.
^
Install the end with the green tape through the floor opening.
8. Connect the heater inlet line to the heater inlet line. Refer to illustration: Multiple-Piece Auxiliary A/C Heater Line Kit.
1
Connect the fittings.
2
Loosely install the nut.
9. Tighten the four peanut fittings.