Navigator 4WD V8-5.4L DOHC VIN A (2000)
^
Starting from the rear of the vehicle, install the end with the blue tape over the axle between the frame and the body.
2. Connect the heater outlet line peanut fitting.
1
Connect the outlet lines.
2
Loosely install the nut.
3. Install the heater outlet line.
^
Starting from the rear of the vehicle, install the end with the red tape between the frame and the floor pan.
4. Connect the heater outlet line to the heater outlet line. Refer to illustration: Multiple-Piece Auxiliary A/C Heater Line Kit.
1
Connect the fittings.
2
Loosely install the nut.
5. Install the heater outlet line.
1
Remove RH rear wheel and tire.
2
Install the end with blue tape between the frame and the body.
